Product technologies-Faq

Question 1

What's the biggest spec for tube?

Accepted Answer

What's the biggest spec for tube? ScienceRich Co., Ltd focus on ultra-fine specifications for the tube product, so there is limited for the production equipment. The maximum outer diameter is 3 mm and the inner diameter is 2 mm.

Question 2

What's EN45545-2 R22/R3?

Accepted Answer

What is EN45545-2 R22/R23? EN45545-2 (R22/R23) is the requirement for the burning behavior of rail vehicles in the European fire safety standards. For our silicone sealing strips, we have added a series that meets the most stringent "HL (Hazard Level)-3" series. It is a product with extremely excellent flame retardancy and low smoke generation, and has been confirmed to meet the ISO/IEC 17025 accredited testing laboratory, so it can be used as a gasket or sealing material for railway vehicles. The design is embedded with "stainless steel (SUS443) stamped metal", which has excellent rust resistance, flexibility and safety, and is used in various use environments such as harsh outdoor places. It can be manufactured as a single product, not necessarily as a silicone trimming strip, such as: gaskets and sealing materials for railway vehicles, testing equipment, electrical equipment, packaging materials for testing equipment, cable sleeves, etc.

Question 3

What is Sube up? Why to choose it?

Accepted Answer

What is Sube up? "Sube up" is a technology in which a film layer made of a special smooth hard resin is coated on the surface layers of TPO (olefin elastomer) and TPS (styrene elastomer) by simultaneous extrusion molding. Generally, TPO , TPS, etc. are materials that disperse fine rubber powder in resin or have a block structure, so the surface of the extruded product has rubber elasticity and is extremely non-slip. Static electricity is generated due to poor fluidity, adhesion to mating parts and non-polar materials. In addition, "Sube up" is a processing technology in which a smooth layer made of a special smooth hard resin is formed with a film (about 20μm ), so it will not damage the flexibility of the substrate, so it should be widely used as Sealing materials and gaskets. Why choose Sube up? 1. Excellent sliding characteristics 2. Excellent stain resistance 3. Excellent durability 4. Excellent anti-sticking performance 5. Excellent chemical resistance

Question 4

Is ScienceRich commissioned to print out by 3D printing?

Accepted Answer

1. Can we print with POM material? A: It used to be printed on POM material, but it wasn't of good quality. So it isn't allowed this time. 2. Is there MOQ limited? By weight or quantity? A: No MOQ limited, but technical cooperation with Japan company, print in Japan. We'll suggest MOQ according to the quantity, size and printing time. The quotation is based on printing time. 3. What is the criteria for tolerance? A: There are no specific tolerances because it is based on the material, size, shape...etc. but It can be as the targeted by intermediate tolerances of JIS0405-B. 4. What is the delivery schedule? A: About 3~4 weeks, as the answer of question 2, depending on the printing time. 5. Does the PEEK material contain Glass fiber (GF),Carbon Fiber (CF)? A: PEEK materials can be selected for GF/CF or non-GF/CF. 6. Can the surface be glossy or texture? A: After printing, it can be proceesing as glossy. 7. What is the temperature resistance of 3D printing PEEK material? A: The temperature of PEEK material is 220～260 degrees.

久久天天躁夜夜躁狠狠,欧美精品性爱,国产亚洲高清国产拍精品,99久久久久99,日本一区二区三区无码大学生,中日av一区二区三区免费观看,日本欧美在线

What's the biggest spec for tube?

What's EN45545-2 R22/R3?

What is Sube up? Why to choose it?

Is ScienceRich commissioned to print out by 3D printing?